Epoxy Resin Kit 2:1 ratio - contain high clarity and high quality resin and hardener, formulated in Australian for Australian conditions. (Epoxy Resin Kit is supplied as a complete pack with the correct amount of hardener). The Epoxy Resin Kit is a Low Viscosity Epoxy Resin that can be used in a huge variety of applications including jewelry, artwork, casting, boat hulls and structures which need to completely exclude moisture, as well as laminating and bonding of nearly all materials. It is ideal for clear floor coatings as well as pebble mixing around trees. When modified with fillers such as wood powder or Colloidal Silica the resin can be used as a filling and fairing compound with outstanding results.
These resins can also be used with most types of fibreglass (if using Chopped Strand Mat, you will need a special type for Epoxy Resin which is available from us), carbon fibre or kevlar, as well as used over urethane foams and other sandwich core materials. These resins tend to be fairly rigid when cured.
Directions for use: Mix resin and hardener EXACTLY in the ratio shown on the label.
Coverage: It takes about 250 grams of resin to saturate a meter square of Fibreglass Cloth (200gram weight) or about 200 grams of mixed Epoxy resin to saturate 1 square meter of a flat non porous surface.
Kit contains 100Lt Part B HARDENER only.
Shelf life of epoxies is well over 12 months. Product maybe supplied in alternate brand packaging but product is identical
Mixing Ratio 2 parts “A” Resin to 1 part “B” Hardener by VOLUME.
Working time 45 mins at 25 deg C. Initial cure 12 hrs with full cure 3 days.
Acetone, Cloth, Chopped Strand Mat, Fillers, Tools and safety equipment are available in our store.
Clean all brushes, rollers and fibreglass tools with Acetone.
Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue.