WAX SOLUTION is a mixture of wax dissolved in Styrene Monomer and is used as an additive in Gel-Coat and Polyester resin. The addition of WAX SOLUTION will remove the tacky or grab properties when the resin or gel-coat has cured. Once added and cured, the resin can no longer provide a suitable bond between laminations. Therefore the resin surface must be rubbed back to provide a grip surface for the next lamination. The addition of WAX SOLUTION to the resin also reduces the styrene emissions (stink) from the finished product.
DIRECTIONS FOR USE: Add WAX SOLUTION to un-waxed resin or Gelcoat in a ratio of about 2.5%. Amount is not critical but more WAX SOLUTION than less is preferred. The WAX SOLUTION should be mixed well into the gel-coat or resin.
SAFETY PRECAUTIONS: Do not mix WAX SOLUTION directly with MEKP.
MEKP, Flowcoat, Gelcoat, Polyester Resin, Chopped Strand Mat, Tools and safety equipment are available in our store.
Clean all brushes, rollers and fibreglass tools with Acetone.
Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue.
Wax Solution 1Lt
As this is a Dangerous Goods item, then a freight surcharge may apply? But it is all dependent on your location (This surcharge is applied by the freight companies and we unfortunately have no control over their charges).
Please email us to see if this freight surcharge applies to your area - please let us know your suburb, postcode and which items you are aboutto purchase and we can then contact the freight company and ask them as to what surcharge is applicable, and then finally email you with the total.